GLAZING GUIDES

300 Kg (660 Lbs)

The Glazing Guides are small lightweight clamps, which are temporarily attached to the window frame to assist glaziers install glass. They prevent the glass falling away during the installation.

The Glazing Guides can be used during emergency work, i.e. drilling the shutter to the Glazing Guides to secure the premises until the glass is replaced.

Benefits:

  • Dramatically reduces the risk of the glass falling through during installation.
  • Eliminates the need to having a glazier standing inside the frame to prevent the glass falling through during installation.
  • Reduces damage to the frames during emergency reglazing work.


Cost Benefits:

The Glazing Guides are an important tool to assist glaziers install glass by reducing the risk of the glass falling through / reducing the need to send out the extra person to stand on the inside of the frame while installing the glass on the outside. As you can see, using the Glazing Guides will make glass installation more efficient.

SPECIFICATIONS

Lifting capacity: 660 Lbs
Upgrade to 1100lbs available
Small footprint with counterweights
Front extension legs without counterweights
Rotates glass 360°
Handles glass 144” x 96”
6 x 12” vacuum cups
4 adjustable/removable cups
12 v battery powered vacuum pump
Castor legs adjust laterally
Mast tilt range +8 to -3 degrees
Machine weight - 660lbs + 330lbs c/w

TESTIMONIALS

Kym Wilson
Kym WilsonBayview Glazing QLD AUSTRALIA
Read More
Just a quick note to say what a great piece of equipment. As I am a glazier that has a buggered back and now confined to the shiny seat in the office I reckon if the Nomad was around 25 years ago I would still be glazing commercial. We have just done our first two reglazes both 12.38 laminate 2400 x 3400 aprox 1000 off the ground in a local shop front. Last time it took 3hrs and 6 men to reglaze 1 panel only including scaffold and back pain. This time 4 people and the Nomad, no scaffold and 2 panels took 1 hour including loading the old 12.38 lam on the truck!!!!!! Possibly could have used 3 people but being the first time, are to be sure to be sure! Instant success and the knockers are now believers!! We set a frame approx 2 mtrs square up in the factory and used a piece of 8.38 lam for practice and used 6 people to glaze the panel two times each as a training session before tackling possibly the biggest reglazes in town. Thanks for the prompt service and I will recommend this machine and your business anywhere anytime. Regards extremely happy” Kym Wilson